home | english | español | français | employment | terms of use | sitemap

SafeSteam™ Steam Cleaners

Sioux Corporation now manufactures the Walters SafeSteam™ fireless steam cleaner line.

The SafeSteam™ lets you use your plant's internal steam as a powerful steam cleaning tool!

 safe steam steam cleaner

If your plant has 80-150 PSI (5.5 -10.3 BAR) steam, here is an innovative way to use that steam for cleaning purposes. The SafeSteam™ is a steam cleaner that has many benefits over conventional steam cleaners. It utilizes your existing steam system, which eliminates the requirements for a burner, and it uses less water, fuel and electricity than a pressure washer.


No Burner, Exhaust or Fuel Tanks to Fill

Plant steam by itself is too dry for effective use in cleaning applications. SafeSteam™ combines your plant steam with cold water to create a powerful steam cleaner that can be used for plant maintenance and sterilization. By using your existing steam, there is no need for a burner, which eliminates combustible fuel and tedious burner maintenance. Without a burner, there is no exhaust, so the machine can be used indoors without air contamination or special venting.


SafeSteam Saves You Money and Time

SafeSteam is always instantly ready. Operators just pick up the gun and go to work. SafeSteam is easy for your internal maintenance team to maintain. No dealer or costly service contracts are required. Because of its simple, streamlined design, it’s at least $1,000 less expensive than conventional steam cleaners.


Convenience & Power for Tough Cleaning Jobs

SafeSteam™ can be used for sterilizing, cutting through heavy grease, paint preparation, cleaning delicate equipment and sensitive parts, and many other tough cleaning jobs. It can be used just about anywhere inside or outside your facility where you need the power of a steam cleaner without the splash-back of a pressure washer.



  • Input: 3.0 GPM (11.4 LPM) water @ 80-150 PSI (5.5-10.3 BAR) plant steam
  • Output: Produces steam/water mixture; temperature is 325°F/162°C prior to nozzle discharge (output temperature is dependent on steam input temperature and pressure)
  • Industrial grade triplex plunger pump, direct driven
  • 3/4 HP, TEFC, 1750 RPM water pump motor
  • Operating current 11 amps at 115V/1Ph/60Hz
  • Connects to standard 115V, 15 AMP receptacle
  • 1/2 inch x 50 foot (1.27cm x 15.24m) steam hose
  •  Round steam nozzle with orifice
  • Chemical metering device and bracket for 5 gallon (18.9 liter) detergent bucket
  • Includes temperature gauge and pressure relief valve
  • Mounted on heavy duty mechanical grade steel frame
  • Choose from three Walters heavy-duty trigger type Steam Guns with barrel and hose swivels
  • Optional hose reel, additional hose, fittings and flare steam nozzles are available. Please contact factory.
  • Steam line requirements: approximately 300 lb/hr (136 kg/hr) of steam @ 80-150 PSI (5.5-10.3 BAR)
  • Water supply requirement: 3 GPM (11.4 LPM) cold water @ 15-100 PSI (1-6.9 BAR)
  • Dimensions: 34 ”L x 24”W x 22”H (86.4cm x 61cm x 56cm)
  • Approximate Shipping Weight: 250 lbs. (113 kg)
  • Net Weight: 200 lbs. (90.7 kg)   
  • Click here for Engineering Drawing





Click here for SafeSteam Brochure